Office hours: Monday to Friday, 8:30am to 5pm · 24/7 emergency fault line and callout support

Client portal
Client portal

Fire door inspections and repairs in Hertfordshire

A fire door only works if it closes properly, seals properly and hasn’t been damaged. We inspect fire doors, write up what we find in plain English with photos, and can quote for the repairs.

  • Blocks of flats and communal areas
  • HMOs and rented property
  • Offices, schools and commercial buildings
Pair of oak-effect fire doors with vision panels and kick plates in a corridor in StockportStockport

What the job involves

We go through the building door by door. For each fire door we check:

  • The gaps between the door and the frame, and under the door.
  • The intumescent strips and smoke seals, which swell in a fire to close the gaps.
  • The hinges, latch and handle, and that they’re the right type for a fire door.
  • The self-closer: does the door close fully and latch on its own from any angle?
  • Any glazing, vision panels and the beads holding them in.
  • Signs such as “Fire door keep shut”, and any label or plug showing the door’s certification.
  • Damage, holes, wedges or alterations that could stop the door working.

We photograph each door and record what we find. Doors that need attention are listed with the reason and what we’d recommend.

Why fire doors fail

Most fire door problems aren’t about the door itself, but what has happened to it since it was fitted. Doors get wedged open with a fire extinguisher or a door stop. Closers get disconnected because the door is “too heavy”. Seals get painted over or pulled off. Gaps open up as the door drops on its hinges. Letterboxes, spy holes and new locks get fitted without the right fire-rated parts. Each of these can let smoke and fire through in minutes. Regular inspections pick them up, and most are cheap to put right.

What you get

  • A clear report showing which doors pass, which need attention and why, with photos.
  • Plain English you can share with your fire risk assessor, insurer or managing agent.
  • A quote for any repairs, such as adjusting or replacing closers, replacing seals, or fixing hardware and signs.
  • We complete your certificate or service report on site and email it to you before the job is closed. Each one has a QR code to check it’s genuine, and they’re all in your online portal.

Fire doors are mostly a business and communal-building concern, but we’re happy to advise homeowners too, for example on doors in a loft conversion.

How servicing works

Fire doors take a beating: wedged open, kicked, rehung, or fitted with the wrong hardware. Regular inspections catch problems before they turn into a failed assessment. How often depends on the building. Busy communal doors need checking more often than a door that’s rarely used, and blocks of flats over 11 metres have set intervals under the Fire Safety (England) Regulations 2022.

We keep your inspection dates on file and remind you when the next one is due. Fire doors often hold open on magnetic releases linked to the fire alarm, so they close when the alarm sounds; we can test those at the same visit. For HMOs and flats, see fire safety for landlords and HMOs.

Recent project: See a recent fire door job in Hemel Hempstead.

Often booked together: fire risk assessments and fire alarm servicing.

Your paperwork: We complete your certificate or service report on site and email it to you before the job is closed. It has a QR code to check it’s genuine, and it’s always in your online portal.

Areas we cover

We carry out fire door inspections across our main areas:

Full coverage across Hertfordshire, Bedfordshire, Buckinghamshire and Cambridgeshire, plus north and west London, Harlow (Essex) and Windsor (Berkshire).

Commercial projects further afield by arrangement. See all the areas we cover.

Some of our work

Questions people ask

How often should fire doors be inspected?

It depends on the building and how much use the doors get. For blocks of flats in England over 11 metres high, the Fire Safety (England) Regulations 2022 require communal fire doors to be checked every three months and flat entrance doors every year. Your fire risk assessment should say what’s right for your building.

What do you check?

The gaps around the door, the intumescent strips and smoke seals, hinges, the self-closer, the latch, any glazing, signs, and whether the door shows damage or alterations that could stop it holding back fire and smoke.

What happens if a door fails?

We explain why in the report, with photos. Many issues, like a closer that needs adjusting or missing seals, can be put right. If a door can’t be fixed, we’ll tell you and quote for the next step.

Is a fire door just a heavy door?

No. A fire door is a tested set of door, frame, seals, hinges and hardware. Swapping a part, like a handle or hinge, for one that isn’t suitable can affect how it performs.

Want a price?

Call, WhatsApp or send a quick quote request. We’ll come and have a look, and quotes are free.